Tie Wire Belt Pack – 1.57 mm × 95 m Coils
Soft low-carbon wire, 10 coils to the carton, 64 cartons to the pallet. Specified the way Australian and New Zealand distributors actually sell it, so the coil does not fight the fixer at the bar.
One grade only — soft low-carbon, annealed. Rod in, retail-ready carton out, under one roof in Dingzhou since 1998.
Specification
Material: soft low-carbon steel, annealed (the only grade we draw)
Diameter: 1.57 mm (16 G) · also supplied as 1.60 mm nominal
Coil: 95 m, 1.42 kg ±1% — printed on the carton
Pack: 10 coils per carton, 64 cartons per pallet = 640 coils
Pallet ≈ 0.9 t · typically 10 pallets to a 20′
Export packing
Oiled paper inner wrap on every coil — the oil film is the barrier, not a dust cover
Heavier wrap and desiccant for long or humid routes
Cartons printed to your artwork: SKU, barcode, pack count, origin
ISPM-15 timber pallets or steel pallets — both supplied
Loading plan before booking: cartons per pallet, pallets per 20′
Why it suits AU/NZ sites
Soft, and held there: one grade only, so annealing is not a setting we juggle
Twists tight by hand — no spring-back, no second pull to take up slack
Lies down against deformed bar instead of arching away
Stretches and whitens before it breaks, so a bad tie shows in your hand
Layer wound with sealed ends: the last metre behaves like the first
Supply and terms
48 × 20′ containers per month — this pack cubes out before it weighs out
4 weeks from order and artwork approval
MOQ 1 pallet (640 coils, ≈0.9 t) per SKU; LCL consolidation available
Batch test report with measured values against your PO
No anti-dumping duty on finished wire into AU or NZ (HS 7217)
Private label and mixed-SKU pallets
Send your spec sheet and we quote against it
